APPROXIMATE DISPATCH TIME FRAME IS BETWEEN 1-3 WEEKS
STOCK LEVELS CAN CHANGE AT ANY TIME SO WE WILL ADVISE IF THERE WILL BE ANY DELAYS AFTER YOU HAVE PLACED YOUR ORDER. OR FEEL FREE TO CONTACT US BEFORE PURCHASING.
AIRBAG MAN AIR SUSPENSION HELPER KIT FOR LEAF SPRINGS SUIT HOLDEN COLORADO RC 4x2 08-12 (RR4599) - STANDARD HEIGHT
Full droop limit 260mm, btm of chassis to axle top, see Note *
Airbags are not just for 4wd’s towing a caravan, boat or trailer. If your vehicle tows or carries uneven loads causing the rear or front end to sag then you need to drive safe and level up with Airbag Man. Airbag Man engineer, design and manufacture over 1000 airbag kits to suit a wide range of vehicles.
By installing Airbag Man to your vehicle you can take advantage of many features and benefits which include adjustable levelling control, eliminating spring sag, safer load carrying, better braking, improved steering and handling, stabilise body roll, prevents bottoming out, excellent ride quality, reduced tyre wear and lower maintenance costs.
Airbag kit includes two airbags, vehicle specific airbag mounts, fasteners, air fittings, air line tubing and two inflation valves, full instructions included.
Airbags are fitted in addition to leaf springs to provide load carrying assistance and are easily inflated or deflated to cater for the vehicle loading.
*Full Droop measurements are taken by jacking or lifting the vehicle so that the suspension with all components connected, is at its hanging limit, then measure the gap directly above the centre bolt, from the bottom of the chassis rail (or other nominated position) to the top of the axle or leaf, whichever is closer. Ensure the vehicle is jacked or lifted using suitable safe equipment, and using correct practices. Bolt in packersare available for many applications if a lift or measurement requires a different measurement to those listed.